Techome TVL3, Quick Installation And Instruction Manual, Page: 2 / 2

PAIRING THE RF REMOTE
INSTALLING THE CONTROL BOX
1 2
1. Flick the ‘ SET ’ switch to the right
on the Switch Box.
2. The Control Box will beep 3 times.
Followed by 7 seconds of silence and then
continuous beeping.
3. During the continuous beeping,
press any button on the RF Remote.
4. Return the ‘ SET ’ button back to
the left again to regain control of
the TV Lift.
7 sec
Silence
SETTING THE MINIMUM HEIGHT LIMIT
1. Adjust the TV Lift height to the
desired MINIMUM height.
3. Hold ‘ DOWN ’ on the Switch Box
until you hear two consecutive
beeps, indicating successful setting.
2. Flick the ‘ SET ’ switch to the right
on the Switch Box.
4. Return the ‘ SET ’ button back to
the left again to regain control of
the TV Lift.
OR
SETTING THE MAXIMUM HEIGHT LIMIT
1. Adjust the TV Lift height to the
desired MAXIMUM height.
3. Hold ‘ UP ’ on the Switch Box
until you hear two consecutive
beeps, indicating successful setting.
2. Flick the ‘ SET ’ switch to the right
on the Switch Box.
4. Return the ‘ SET ’ button back to
the left again to regain control of
the TV Lift.
OR
Switch Box
IR Receiver
Control Box: TC11
Junction Box/Remote Receiver
TVL3