Transport
32
7.3
Transport to the installation location
WARNING
Danger for persons!
Increased risk of injuries through improper transport.
The transport of the unit should be carried out only by suitably qualified persons
who are familiar with the unit and who have been informed as to potential
hazards.
Risk of crushing between components during transport.
During the transport of components, limbs may be crushed. Serious injuries may
result.
•
Only use suitable means of transport.
•
Secure the loads adequately.
•
Wear personal protective equipment.
NOTICE
Damaging of unit!
Damage due to improper transport.
•
Make sure to follow signs (if attached) at unit when transporting unit.
•
Transport units with suitable lifting gear only.
•
Transport the unit only when it is empty.
•
Transport on suitable and secured transporting pallet.
•
When moving the unit, the respective transport vehicle (e.g., forklift, pallet
truck) must be operated compliant with the local rules and regulations and
according to relevant industrial accident prevention regulations.
•
Compliance with the maximum lifting capacity of the transport equipment is
mandatory. The weight of the unit is stated in the "Technical Data" section.
•
Push the forks of the forklift/pallet truck horizontally into the transport
pockets of the unit.
•
Ensure that the load is evenly distributed when using a forklift/pallet truck.
•
Use a low lifting speed.
NOTE
The equipment cannot be moved by crane.
