Technoton MasterCAN DAC15, Operation Manual, Page: 47 / 63

Annex A SPN of MasterCAN DAC Functional modules / Digital-to-analog gate DAC15 FM
MasterCAN DAC J1939 i/o modules. Operation manual. Version 2.0
© Technoton, 2018 47
A.2 Digital-to-analog gate DAC15 FM
Digital-to-Analog Gate DAC15 FM * — is designed to receive digital data of PGN via
CAN j1939/S6 Telematics interface , to convert SPN parameters into analog signals of
different types (voltage, frequency, pulse, current, discrete, resistive) and transmit them to
the respective Unit outputs.
* This FM is created only for MasterCAN DAC15 model.
Figure A.2 — Window of settings of Digital-to-analog gate DAC15 FM
in Service S6 MasterCAN software
Figure A.3 — Pulse output settings
Table A.2 — Digital-to-analog gate DAC15 FM.
SPNs, displayed and/or editable in Service S6 MasterCAN software
SPN Name
Factory
value*
Unit
of measure
Data Range Clarification
Outputs settings ( PGN 63092 )
(contact group O1, see 2.6 )
521352 Output
number
No No 0…255 Choosing Unit’s contact group O1 of analog/frequency
physical output.
521150 PGN 61444
Electronic engine
controller 1
No 0…65535 Specifying input data of PGN, from which SPN parameter
should be chosen for analog/frequency signal
conversion.
PGN can be selected in Software from the priority list
containing the most important Vehicle parameters or
from extended list of
S6 database .
1214 SPN 190
Engine
speed
No 0…524287 Selecting SPN which should be converted to
analog/frequency signal from the group of parameters of
specified PGN.