Technoton MasterCAN DAC15, Operation Manual, Page: 28 / 63

MasterCAN DAC connection / Connecting analog outputs
MasterCAN DAC J1939 i/o modules. Operation manual. Version 2.0
© Technoton, 2018 28
2.6 Connecting analog outputs
1) Analog outputs of MasterCAN DAC15 are connected to:
• Signal wires of analog voltage/frequency/pulse signal, in compliance with the colour
of the wires and the designation of contacts of
IN/OUT connector
(see table 11);
• Current/discrete/resistive signal wires, in compliance with the colour of the wires and
the designation of contacts of
OUT connector (see table 12).
Table 11 — Connection of MasterCAN DAC15 analog output ( IN/OUT connector)
Connector
Pinout
Connector
Contact
Number
Wire
Marking
Contact
group
Wire
Color
Circuit
Designation
Signal
Parameters
3 AFout+
O1
Red
Analog/
frequency
output See 1.5.3
(table 3)
1 AFout- Brown
Analog/
frequency/pulse
output
Table 12 — Connection of MasterCAN DAC15 analog outputs ( OUT connector)
Connector
Pinout
Connector
Contact
Number
Wire
Marking
Contact
group
Wire
Color
Circuit
Designation
Signal
Parameters
1 Iout-
O2
Brown
Current
output
See 1.5.3
(table 3)
5 Iout+ Red
2 D1GND
O3
Brown
Discrete
output
6 D1+ Red
3
D2GND
O4
Brown
Discrete
output
7
D2+ Red
4 Rout-
O5
Brown
Resistive
output
8
Rout+ Red