Feel good through warmth from electricity - www.technotherm.com
Installation and technical manual - Rapid Heater SM
Feel good through warmth from electricity - www.technotherm.com
GB
4|
2.1 Delivery
The unit is supplied ready for connection with power cord. The package also
includes attachment for wall mounting.
Damages must be complained immediately to the supplier!
2.2 Wall mounting
1) Keyhole opening (rear)
2) Distance angle
3) Control knob for temperature
control
4) Control knob for timer switch
To prevent inflammable materials from catching fire be sure to keep the prescri-
bed safety distance when installing the device. Mount the device to a wall that
is fireproof up to 90 °C.
The safety distance to the floor should be 20 cm, and at least 10 cm to all other
devices. Furthermore there has to be safety distance of approximately 50 cm
between the ventilation grille, windowsills, roof slopes and ceilings.
If you want to install the device in your bathroom, be sure to keep it out of re-
ach for people taking a shower or a bath.
When mounting the device to the wall, be sure to keep to the dimensions as
indicated in the illustration.
First insert the top fixing screw. Hang the unit up to the rear opening 1). At the
distance angle 2) secure with a screw.
WARNING
Do not install this device in areas that present an explosion hazard like a gara-
ge. Remove all protective coverage before turning on the device. When using
the device for the first time you might detect a strong odor. This is no reason
for concern; it is caused by residues of production and will disappear shortly.
The device takes in the area of the hot air outlet while in service higher tempe-
ratures. Therefore keep children away.
2. Maintenance
Before cleaning the device be sure to turn it off. To clean the device use a damp
towel and a mild detergent.
3. Assembly instruction
This Manual is very important and has to be kept at a safe place at all times. Be
sure to hand this manual to any other succeeding owner of the device.
The device is an electrical heater that was designed and intended to be moun-
