Technosoft iPOS360 VX-CAN Series, Technical Reference, Page: 41 / 47


Technosoft 2019 42 iPOS360x VX-CAN/CAT Technical Reference
3.10 Electrical Specifications
All parameters measured under the following conditions (unless otherwise specified):
T
amb
= 0…70
°
C, V
LOG
= 24 V
DC
; V
MOT
= 24V
DC
; Supplies start-up / shutdown sequence: - any-
Load current (sinusoidal amplitude / continuous BLDC,DC,stepper) = 4A iPOS3604/ 2A iPOS3602
3.10.1 Operating Conditions
Min. Typ. Max. Units
Ambient temperature
iPOS360X VX-CAN 0 +70
ºC
iPOS360X VX-CAT 0 +40
Ambient humidity Non-condensing 0 90 %Rh
Altitude / pressure
1
Altitude (referenced to sea level) -0.1 0 ÷ 2.5
2
Km
Ambient Pressure 0
2
0.75 ÷ 1 10.0 atm
3.10.2 Storage Conditions
Min. Typ. Max. Units
Ambient temperature
iPOS360X VX-CAN -40 105
ºC
iPOS360X VX-CAT -40 85
Ambient humidity Non-condensing 0 100 %Rh
Ambient Pressure 0 10.0 atm
ESD capability (Human body model)
Not powered; applies to any accessible part
±
0.5
kV
Original packaging
±
15 kV
3.10.3 Mechanical Mounting
Min. Typ. Max. Units
Airflow natural convection, closed box
Spacing required for vertical mounting
Between adjacent drives 30 mm
Between drives and nearby walls 30 mm
Between drives and roof-top 20 mm
Spacing required for horizontal mounting
Between adjacent drives 4 mm
Between drives and nearby walls 5 mm
Space needed for drive removal 10 mm
Between drives and roof-top 15 mm
Insertion force
Using recommended mating connectors; without
retainer
20 36 N
Extraction force 5 10 N
3.10.4 Environmental Characteristics
Min. Typ. Max. Units
iPOS360x VX-CAN/CAT
Size ( Length x Width x Height )
Without mating connector / retainer
56 x 28.8 x 7.6 mm
~2.2 x 1.1 x 0.3 inch
With recommended mating vertical connector and retainer.
Height above PCB surface.
63.3 x 32.6 x 16.3 mm
~2.5 x 1.3 x 0.64 inch
With recommended mating horizontal connector. Height
above PCB surface.
56 x 41.2 x 7.6 mm
~2.2 x 1.6 x 0.3 inch
ECAT-VX adapter
Size ( Length x Width x Height )
Without mating connector
31.5 x 28.8 x 5.2 mm
~1.24 x 1.13 x 0.2 inch
With recommended mating vertical connector. Height above
PCB surface.
31.5 x 32.6 x 8.8 mm
~1.24 x 1.28 x 0.35 inch
With recommended mating horizontal connector. Height
above PCB surface. 31.5 x 41.2 x 9.4 mm
~1.24 x 1.62 x 0.37 inch
Weight
iPOS360X VX-CAN/CAT 10 g
ECAT-VX adapter 5 g
Cleaning agents Dry cleaning is recommended Only Water- or Alcohol- based
Protection degree According to IEC60529, UL508 IP00 -
3.10.5 Logic Supply Input (+V
LOG
)
Min. Typ. Max. Units
Supply voltage
Nominal values 7 24 36 V
DC
Absolute maximum values, drive operating but outside
guaranteed parameters
4.9 42 V
DC
Absolute maximum values, surge
(duration
≤
10ms)
†
-1 +45 V
Supply current
+V
LOG
= 7V 125 300
mA
+V
LOG
= 12V 80 200
+V
LOG
= 24V 50 125
+V
LOG
= 40V 40 100
1
iPOS360x can be operated in vacuum (no altitude restriction), but at altitudes over 2,500m, current and power rating are reduced due
to thermal dissipation efficiency.