instr-TE-MTE-eng.doc
2
BATTERY CHECK:
At any time, the battery level of the safe can be checked by pressing the “
LOCK
”
key when the door is
closed.
When the display show
BA-HI
, the level of the batteries is good.
When the display show
BA-LO
, the level of the batteries is low and you need to change the batteries using
4 x
1,5 V. alkaline batteries LR6 AA size
.
POWER FAILURE OPENING:
In the event of loss of power due to the internal batteries failure, you have the possibility to use the external
supplied battery-box.
Insert in the battery-box 4
x 1,5 V alkaline batteries LR6 AA size
(
see pic. 1).
Remove the adhesive label marked with “
Technosafe
” and you will see two holes.
Insert the plug of the battery-box in the hole placed on the right side (
see pic. 2).
Digit your personal code to open the door.
Change the internal batteries with new ones.
TO OPEN THE DOOR WITH MECHANICAL KEY:
The emergency key is to be used only when the safe is locked (bolts outside)
When the safe is closed and you cannot open it by your Personal Code or to change the internal
batteries, then you have an emergency opening with an override key.
Remove the adhesive label marked with “
Technosafe
” and you will see two holes.
Insert the emergency key
(with the small recess on head upward)
in the hole placed on the left side
(
see pic. 2
).
Turn the key clockwise until the stop point. The display will show "
NANUAL
".
Turn the key counter-clockwise and take it out.
Press the “
LOCK
” key and the bolts will be automatically retract.
Pic. 1
Battery-box
Pic. 2
WARNING!
NEVER LEAVE YOUR EMERGENCY KEYS IN THE SAFE
Emergency
key
External battery
