TECHNOMAX SRL
VIA CASA BIANCA, 10
26037 SAN GIOVANNI IN CROCE (CR)
TEL +39 0375 310 281 - FAX +39 0375 310282
www.technomax.it
Istr-Euroline-r03-eng.doc pagina 2 di 4
Change main code:
Ø
Press and hold key
“0”
until double signal.
Ø
Enter the main code in use (double signal).
Factory default is 123456
Ø
Enter the new main code (double signal).
Ø
Repeat the new main code (double signal).
Note:
In case of errors ( long signal ) the main code in use remains valid.
Always perform this operation with the door opened.
Test lock operation several times before closing the door.
WARNING:
forget the main code involves the forced opening of the safe with inevitable damage.
Add the second user code:
Ø
Press and hold key
“1”
until double signal;
the light remains switched on during the following actions.
Ø
Enter the main code.
Ø
Enter the new second user code (double signal).
Ø
Confirm the new second user code (double signal).
.
Delete the second user code:
Ø
Press and hold key
“3”
until double signal;
the light remains switched on during the following actions.
Ø
Enter the main code.
Ø
The second user code is now deleted.
Membrane check-up:
Ø
Press and hold key
“5”
until double signal.
Ø
Enter the following sequence of numbers:
1-2-3-4-5-6-7-8-9-0.
* Double signal = key correctly working.
* Long signal = key not working.
