TECHNOMAX SRL
VIA CASA BIANCA, 10
26037 SAN GIOVANNI IN CROCE (CR)
TEL +39 0375 310 281 - FAX +39 0375 310282
www.technomax.it
Istr-Euroline-r03-eng.doc pagina 1 di 4
USER INSTRUCTION ELECTRONIC LOCK MOD. “EUROLINE”
Before using the safe, please, read carefully this instructions manual
and retain it for future reference.
Features :
•
The electronic lock has the possibility to program two different codes (main code and second user
code).
•
By new safes the default main code is : 123456 and the second user code is not programmed.
•
Time delay is disabled.
•
Main and second user code must be of 6 digit.
•
External power supply through contacts on keypad.
•
Possibility to program a time-delay opening from 0 to 99 minutes.
Open:
Ø
Enter a six digits valid main code
( factory default main code 1-2-3-4-5-6 ).
* A valid code is followed by a double signal.
* An invalid code is followed by a long signal.
Ø
If time delay is not active open the door.
Ø
If time delay is active the counting starts (during time delay counting the light flashes every 2 seconds).
Ø
When time delay elapses, open window counting starts (during open window counting the buzzer beeps
every 2 seconds).
Ø
Enter the main code again and open the door.
Note:
If the door is not opened within 3 (three) seconds, the lock secures automatically.
Manipulation protection:
The entry of 4 (four) consecutives invalid codes, will cause a 5 (five) minutes lock blocking.
During this period, the light flashes every 10 seconds and any key pressed will produce a
long signal.
After expiration, the entry of 2 (two) more invalid codes, will restart the 5 minutes blocking period.
Battery contacts
Fig. 1
