18
6. Operation
6.1
Getting Started
(When the DiSEqC Motor parameter is set as USALS <Figure 6.1.6>)
▪
Sat Degree:
Satellite location.
▪
Position Setting:
Press
OK
.
▪
Goto Reference:
Move the dish to the reference 0 position.
▪
Antenna Longitude:
Your longitude at present.
▪
Antenna Latitude:
Your latitude at present.
✽
Note:
You need to know what LNB you are using to correctly set the L.O.
(local oscillator) frequency.
✽
Note:
You need to understand how your receiver is connected to properly set the
22KHz and DiSEqC.
Figure 6.1.6
Figure 6.1.7
6. When you are done, press the
EXIT
button.
