Technology Programs 911 Alert, Owner'S Instructions Manual, Page: 7 / 10

!
If you had really dialed 911,
#
911 also turns the
strobe off.
3. Try the
*
911 /
#
911 test on other phone extensions.
!"
When activating the strobe from the phone
(emergency use), the transmitter beeps and the “911
DIALED” light flashes slowly while the strobe is
flashing.
Using The 911 Alert in Non-Emergency Mode
You can use the 911 Alert in the non-emergency mode. For
example, when waiting for a delivery or guests, just push the
large
STROBE ON/OFF button on the transmitter. The Strobe
will flash until this button is pushed again.
! ! ! !
"
The unit may flash several times before turning off.
11
Door Mounting
To mount the strobe on the door:
1. Fix the #1 mounting bracket on the door using 2 screws.
2. Snap the strobe into # 1 Mounting Bracket
Mailbox Mounting
1. Fix the #2 Mounting bracket on the top of Mailbox
using 2 screws.
2. Snap the strobe’s clip into the #2 Mounting bracket.
3. Rotate the strobe to the forward position.
10
Before Using the System
Before you use the ‘911 Alert’, remove the plastic tab from the
battery compartment.
This plastic tab prevents battery drain in shipment.
Remove the tab carefully, pull it out in the direction of the
arrow. If it tears, it will then be necessary to open the back to
remove the tab inside.