3. Once the Alarm time is set, press the SNOOZE key or wait for
automatic timeout to exit the Alarm time setting mode.
Note:
Upon exit of the alarm setting, the alarm icon will appear on the LCD
and the alarm function will be automatically ON. The duration for the
alarm ring time is about 98 seconds
To set the alarm ON/OFF, press the AL/HR key briefly. The (((
)))
icon appears = ON or disappears = OFF.
TO STOP THE ALARM:
When the alarm is sounding, press any key to stop the alarm. Or
press the SNOOZE key briefly to enter in the snooze mode.
SNOOZE SETTING
When pressing the SNOOZE key once during alarm
sounding, the snooze function is activated.
When pressing the SNOOZE key during alarm sounding or
snooze function for about 2 second, after confirmation of a
"beep“ sound, the alarm will switch OFF for the next 24 hours
and no snooze function will be activated.
Note:
If the SNOOZE key is pressed down for about 2 second, except
during alarm ringing, it will display the alarm time.
MEMORY ALARM (STORAGE OF ALARM TIMES)
This unique feature enables to view the previously alarm set times
including the current alarm time. To select the desired alarm time
from a previously recorded alarm time without the need to re-enter
that specific alarm time, please follow these steps:
1. Press the MEMO key to select from any of the three recorded
alarm times (current alarm time and previous alarm times).
2. Press the AL/HR key to store the selected alarm time as the
current set alarm time.
3. Press the SNOOZE key or wait for automatic timeout The mode
will return to normal display mode.
Note:
Upon exit of the memo alarm setting, the alarm will be automatic
ON.
LCD BACKLIGHT
The LCD backlight will be ON for about 2 seconds when pressing
any key.
REPLACING BATTERY:
For optimum running accuracy, battery should be replaced at
least once a year or when the LCD contrast becomes dim or
unclear.
Please help in the preservation of the environment and
return used batteries to an authorized depot.
MAINTENANCE:
Avoid placing alarm clock in areas prone to vibration and shock
as these may cause damage and inaccurate readings.
Avoid exposure to sudden changes in temperature such as
direct sunlight, extreme cold and wet or moist conditions.
When cleaning the display and casing, use a soft damp cloth
only. Do not use solvents or scouring agents as they may mark
the LCD and casing.
Do not submerge the alarm clock into water.
Do not make or attempt to make any repairs to the alarm clock.
Return it to its original point of purchase for repair by a qualified
engineer. Opening and tampering with the Unit may invalidate its
guarantee.
SPECIFICATIONS:
Recommended
operating
temperatures:
0.1ºC to +59.9ºC with 0.1ºC resolution
Indoor temperature checking interval:
Every 10 seconds
Radio controlled time signal:
DCF-77
Power
source:
1 x AA, IEC LR6 1.5V battery
Battery life: (Alkaline batteries recommended)
Approximately 12 months
Dimensions (L x W x H):
78 x 45 x 100mm
LIABILITY DISCLAIMER:
The manufacturer and supplier cannot accept any responsibility
for any incorrect readings and any consequences that occur
should an inaccurate reading take place.
This product is not to be used for medical purposes or for public
information.
This product is only designed to be used in the home as
indication of the future weather and is not 100% accurate.
Weather forecasts given by this product should be taken only as
an indication and not as being totally accurate.
The specifications of this product may change without prior
notice.
This product is not a toy. Keep out of the reach of children.
No part of this manual may be reproduced without written
consent of the manufacturer.
Alarm time
R&TTE Directive 1999/5/EC
To be used in EC Member and EFTA States.
Summary of the Declaration of Conformity : We hereby declare that
this wireless transmission device does comply with the essential
requirements of R&TTE Directive 1999/5/EC.
MEMO icon
(flashing)
