Page
2
of 3
Year setting > Month setting > Date setting > Language selection
-
Press MODE key for 3 seconds to 12 or 24 hour clock format selection mode, press
“+” or “-“ button to
adjust the display format.
-
Press MODE key again to time zone selection mode, press
“+” or “-“ button to adjust time zone hour
clock difference between
–12 to 12.
-
Press MODE key again to hour set mode, press
“+” or “-“ button to adjust the hour display.
-
Press MODE key again to minute set mode, press
“+” or “-“ button to adjust the minute display.
-
Press MODE key again to year set mode, press
“+” or “-“ button to adjust the year display.
-
Press MODE key again to month set mode, press
“+” or “-“ button to adjust the month display.
-
Press MODE key again to date set mode, press
“+” or “-“ button to adjust the date display.
-
Press MODE key again to language selection mode, press
“+” or “-“ button to adjust display language;
GER = GERMAN
ENG = ENGLISH
ITA = ITALIAN
FRE = FRENCH
NET = NETHERLAND
ESP = SPANISH
DAN = DENMARK
-
Press MODE key once again to exit the set mode.
Alarm setting and operation
Alarm setting
-
Press AL SET key for 3 seconds and go to alarm
hour set mode, press “+” or “-“ button to adjust hour.
-
Press AL SET key again and go to alarm
minute set mode, press “+” or button to adjust minute display.
-
Press AL SET key once again to exit alarm set mode.
Turn on alarm function
Press AL SET key once until the alarm bell appears on the display, it will start beep at the pre-set alarm time.
Turn off alarm function
Press AL SET key once until the alarm bell disappears from the display.
Snooze function
During the alarm sound is beeping, press SNOOZE button once to get extra 5 minutes sleeping time.
Backlight function
Press SNOOZE button once and a backlight will light up for 5 seconds.
Celsius or Fahrenheit temperature display
The temperature display readings can be selected
by the “-” button.
Low battery indicator
When the low battery indicator is showing, please replace the fresh alkaline batteries.
Troubleshooting
In some unusual occasions, the clock may be affected by electrical interference and respond abnormally. In
such conditions, pr
ess the “RESET” button to resume normal operation and you can begin the set up
procedure again.
