AutoGRAPH-ST
– Remote Control Command
25
SMTPLOGIN
Command
SMTPLOGIN
Name
SMTP server login
Supported with firmware
AGST-0.75 and higher
Description
Command is intended to set up a login used for sending
Email via specified SMTP server. To enquire your login,
contact Administrator of the SMTP server.
Command format:
password SMTPLOGIN=login;
parameters of the command:
login
– login used to access the SMTP server in order to send Email.
Sample command:
5672 SMTPLOGIN=user;
Sample reply:
#SMTPUSER=user;
The device uses login “user” to send Email.
