AutoGRAPH-NAVIGATOR • USER MANUAL
45
TechnoKom © 2015
NAVIGATOR configuration tool
GSM modem settings
To configure the device GSM modem operation, go to the “GSM modem” tab (
Fig.50) of the
configuration tool and specify required settings according the description given below.
Fig.50. Tab «GSM modem».
Be careful specifying PIN. If wrong PIN is specified, it will block your SIM card!
ВНИМАНИЕ
Server section:
•
Server
– an IP address or domain name of the serve which AutoGRAPH-NAVIGATOR
transfers data to. The server IP address must be real and static.
•
Port
– a server port. This port number must be similar to a port specified in the server
settings.
SIM1 section
•
APN
–
an access point name for the first SIM card.
•
User
– a user name of the access point, specified in the “APN” field.
•
Password
– a user password of the access point, specified in the “APN” field
•
PIN
– a SIM1 PIN of the device. If the PIN check is disabled for the SIM card, leave the
field empty or enter any four digits.
GPRS settings should be taken from mobile operator, whose SIM-card is installed in the device. Typically
these settings can be seen on the operator’s website.
i
NOTE
