AutoGRAPH-NAVIGATOR • USER MANUAL
33
TechnoKom © 2015
Auto informer
The Auto informer mode is intended to customize AutoGRAPH-NAVIGATOR for the operation
in public transport. This mode provides automatic announcement of public stops and
advertisements.
Route preparation for the Auto informer mode
Route file is created in the Route Editor intended to prepare routes for AutoGRAPH-
NAVIGATOR and AutoGRAPH-INFO devices. This application compiles the file, including
sound files, stops list, and other files required to the proper route processing.
Route loading in AutoGRAPH-NAVIGATOR
Compiled route file must be loaded in
\RouteControl
folder located in the device SD-card root
directory. If there is no
\RouteControl
folder in the SD-card root directory, create it manually.
For more detailed information on route compilation, see the document “Route Editor”.
i
NOTE
To switch the device to Auto informer mode
•
Turn on AutoGRAPH-NAVIGATOR and wait until the device acquires position. The state of
position acquisition is indicated on the Status bar.
•
Then select the Modes option in the Main menu to go to the Modes menu (
). This
menu allows the user to switch the device to the required mode of operation. Current version
of the device firmware supports one mode – Auto informer.
•
Switch the device to the Auto informer mode. This mode requires prepared route file. In this
mode, the device displays name of current route and vehicle next stop (
Fig.28). If the route
file hasn’t been selected, the rout and next stop fields are empty.
•
To select a route, press the Route button, then select the required route. The route list
) contains all route files stored in the
\RouteControl
folder. To scroll the list use Up and
Down buttons.
Fig.27. Modes.
Fig.28. Auto informer mode.
