AutoGRAPH-NAVIGATOR • USER MANUAL
12
TechnoKom © 2015
Getting started
Before starting the operation, ensure that the AutoGRAPH-NAVIGATOR device is configured,
SIM and SD cards are installed.
All necessary information on the device configuration, SIM and memory card installation is
given below. It is highly recommended to study this information before starting the device
installation procedure.
SIM installation
AutoGRAPH-NAVIGATOR is equipped with a holder for two SIM cards. For proper operation,
it is quite sufficient to insert the main SIM card into the device. But the backup card provides
the appropriate operation of the device even if the main SIM card is damaged.
To insert SIM cards:
•
Ensure that the AutoGRAPH-NAVIGATOR device is turned off.
•
Remove the removable panel of the device back cover.
•
Insert a SIM card in the holder intended for the main SIM card (number 1). SIM holder are
marked with numbers on the PCB. To open the holder cover, shift it from the edge of the PCB
and open (
, i.1). Be sure that the SIM card is inserted into the retaining slot with its cut
angle facing the edge of the printed circuit board (Fig
Fig.1. SIM cards installation.
