Technogym spin trainer, Maintenance Manual

Page: 50 / 72

SPIN TRAINER: Service & Maintenance Manual - rev. 2.0
Page 7.12
7.12. DISASSEMBLING THE SECOND ROLLER
Figure 7.12-1
Carry out the procedure described in paragraph
7.8. “Disassembling the guard”.
1. Remove the 2 screws a using a 6-mm hex T-
wrench.
2. Remove the SECOND ROLLER.
To reassemble the SECOND ROLLER, carry out
the above procedure in reverse order.
When reassembling the SECOND
ROLLER, ensure that it doesn't fut
against the guard.
After completing the procedure, align
the SECOND ROLLER using its fixing
slots.
The SECOND ROLLER can be installed on machines which are not equipped with one using
UPGRADE KIT 0P185C.