6
99834154
B
A
Vertical Traction
Contents
Assembling the number holder
The number holder must be assembled
immediately underneath the top: standing
facing the equipment, affix the number holder
on the left tube supporting the guide, so that
it is flush with the rubber stop of the guide.
The number holder is divided into two pieces:
the larger section (
A
) goes on the front, while
the crescent closure (
B
) goes on the back of
the equipment.
Insert the two screws (M5x6 Z) from the front
of the equipment, mating them with the two
M5 cap nuts at the rear; then lock down using
the appropriate spanners.
Identification of the manufacturer
and equipment
Description of the equipment
Technical data
Accessories
Safety labels and devices
Packing
Place of installation
Unpacking
Lifting and handling the
equipment
Adjusting the equipment
Routine maintenance
Replacing the padded
components
Replacing the cable
Adjusting cable tension
Disassembling the front protective
weight stack panel
Technical Service
Codes for original spare parts
Storage
Disposing of the equipment
Using the equipment
