manualshive.com logo in svg

Technogym Selection Low Row, User Manual

Share
Download
Technogym Selection Low Row User Manual Download Page 2

2

Low Row

Contents

Identification of the manufacturer and equipment ............................ 3
Description of the equipment ............................................................ 4
Technical data ................................................................................... 5
Fitting the number holder .................................................................. 6
Safety devices and warnings ............................................................ 7
Place of installation ........................................................................... 9
Lifting and moving the equipment ................................................... 10
Adjusting the equipment ................................................................. 13
Routine maintenance ...................................................................... 14
Replacing the padded parts ............................................................ 15
Replacing the cable ......................................................................... 16
Adjusting cable tension ................................................................... 18
Removing the front weight stack panel ........................................... 19
Technical Service ............................................................................. 20
Storage ............................................................................................ 21
Disposal ........................................................................................... 22
Using the equipment ....................................................................... 23

User manual ...................................................................................... 1
Contents ............................................................................................ 2

Summary of Contents for Selection Low Row

























Reviews:

No comments

Brands by name

Popular brands

Load more brands