Technogym ISOCONTROL, Service Maintenance Manual

Page: 63 / 72

ISOCONTROL: Service & Maintenance Manual - rev. 1.2
Pagina 9.3
MACHINE Selection Element MACHINE Selection Element
ABDOMINA
L CRUNCH
4 4 4 LOW ROW 2 2 2
ABDUCTOR 1 1 1
LOWER
BACK
2 2 2
ADDUCTOR 1 1 1 MULTI HIP 2 / /
ARM CURL 2 2 2 PECTORAL 5 5 5
ARM
EXTENSION
2 2 2 PULL DOWN 4 / /
CHEST
INCLINE
5 / / PULLEY 2 / /
CHEST
PRESS
2 2 2
ROTARY
CALF
4 / /
DELTS 2 / /
ROTARY
TORSO
2 / /
GLUTE 2 2 2
SHOULDER
PRESS
2 2 2
LAT
MACHINE
23 23 23
TOTAL
ABDOMINAL
2 / /
LEG CURL 2 2 2 UPPER BACK 8 / /
LEG
EXTENSION
2 2 2
VERTICAL
TRACTION
2 2 2
LEG PRESS 2 2 2
Use the “+” and “-” keys to bring up the desired value on the display. After reaching the desired
value, wait 5 seconds for the system to automatically advance to the next function.
To save the changes made see paragraph 9.1.9. “Saving the configuration”, to exit without saving
any changes disconnect the power supply form the machine.
9.1.4. P
ACER SPEED
This function is used for calibrating the pacer speed. On the display, the PACER POSITION
message is followed by:
PP:12
Enter the desired pacer speed, i.e. the time recommended for performing the exercise, in 100s of a
millisecond; the value should be between 10 and 50. Recommended values for the individual
machines are as follows:
MACHINE Selection Element MACHINE Selection Element
ABDOMINA
L CRUNCH
12 12 12 LOW ROW 12 12 12
ABDUCTOR
10 10 10
LOWER
BACK
12 12 12
ADDUCTOR
10 10 10
MULTI HIP
12 / /
ARM CURL 12 12 12 PECTORAL 12 12 12
ARM
EXTENSION
12 12 12 PULL DOWN 12 / /
CHEST
INCLINE
12 / / PULLEY 12 / /
CHEST
PRESS
12 12 12
ROTARY
CALF
12 / /
DELTS
12 / /
ROTARY
12 / /