Technogym excite vario, User Manual

Page: 31 / 42

0 cont.
Technical
information
Vario Excite
Troubleshooting
Below is a list of problems that may arise during normal use of the equipment. If the described
remedies do not solve the problem, contact the Technical Support Service.
Problem Cause
Remedy
Equipment doesn’t
switch on Mains power failure (700 and 500 versions).
Check the power supply at the wall socket used by the equipment
by plugging in an appliance that definitely works.
Power supply cable damaged (700 and 500 versions).
Contact the Technogym Technical Support Service.
Installation problems with the power supply cable (700 and
500 versions).
Check the connection.
Burnt-out fuses (700 and 500 versions).
To replace the blown fuse with a spare (.5A (F) contact
Technogym Technical Support Service.
The control panel connector has been accidentally
disconnected.
Contact the Technogym Technical Support Service.
Manufacturer and equipment
identification
Description of the equipment
Technical data
Accessories
Safety devices and notices
Place of installation
Moving the equipment
Levelling
Electrical connection
Connection to another device
Routine maintenance
Changing the fuses
Recharging the battery
Troubleshooting
Technical assistance
Storage
Disposing of the equipment
Switching on and off
Monitoring the heart rate
Ergonomic positioning
on the equipment