Technogym EXCITE Run 500, Service Maintenance Manual

Page: 188 / 234

RUN EXCITE-2008: Service & Maintenance Manual - rev. 1.3
Page 9.34
9.4.6. L
OW KIT MENU
This function directly accesses the firmware of the inverter. To access this menu, when the LED
display shows:
LOW KIT MENU
press
ENTER
. This function is structured as follows:
LOW KIT MENU
Low Kit Version
Config. Registers
9.4.6.1. Low kit version
This function displays the inverter firmware version. To access this menu, when the LED display
shows:
LOW KIT VERSION
press
ENTER
, the following message appears:
H:x L:x B:x
Which identifies the firmware version.
AT drivers for European and US market, use the same SW, nevertheless the first
character among the three which identify the SW version, changes according to the HW
mounted on the machine. In particular you can find:
•
2.x.x if the AT driver on the machine is that for European market.
•
4.x.x if the AT driver on the machine is that for US market.