MYWELLNESS KIOSK PRE-INSTALLATION REQUIREMENTS
Copyright® Technogym
– all rights reserved – reproduction prohibited
Date: 11-01-2021
Document Code: PIR-00166-EN
Rev: 1.1
Uncontrolled copy if printed
- 6 -
2. NETWORK DESIGN
– CONFIGURATION AND INSTALLATION
2.1 INTRODUCTION
▪ Installation and configuration of the network infrastructure (cables), of the network hardware (Switch,
Router, firewall) and any wireless network are at the expense of the customer.
▪ Technogym warns that the efficiency and correct operation of the equipment and of Mywellness Cloud
services depend on the technical characteristics of the hardware that is installed.
▪ Technogym does not guarantee the correct operation of Mywellness Cloud services in the event of
failure to comply with all the technical specifications and warnings indicated.
2.2 NETWORK DESIGN AND INSTALLATION
During the network design and preparation phases, Technogym requests to be put in touch with the
technicians of the company performing the work, in order to obtain and provide technical information,
so that the network is installed and configured according to the required technical requirements.
Technogym cannot be held responsible for failures due to site preparation, assembly and installation
not correct.
2.3 CONFIGURATION AND INSTALLATION
Before performing the installation, the customer should inform Technogym that all the required
components have been provided and installed and that they operate correctly.
For this purpose, Technogym will contact the customer a few days before the date set for installation
to acquire the information related to the installation status of the network for the equipment and thus
check that everything that has been requested to perform installation of the equipment is provided and
operational.
