Technogym CROSS PERSONAL, Service Maintenance Manual

Page: 98 / 118

CROSS PERSONAL: Service & maintenance manual - rev. 1.1
Page 7.16
7.16. DISMANTLING THE LOW KIT, POWER CARD, BRAKE
AND FLYWHEEL
OPERATION DESCRIPTION
Dismantling the Low Kit,
Power Card, Brake and
Flywheel
On the left-hand side of the equipment
1. Disconnect the platform lever from the crank (see “ Platform
Lever ” dismantling procedure).
2. Remove the crank guard cover.
3. Unscrew the 2 screws anchoring the round "mirror-finish" guard
to the frame, using a 4 mm hex key.
4. Remove the side guard covering the mechanics assembly (see
“
Rear guard ” dismantling procedure).
5. It is now possible to remove the Low Kit, the Power Card and
the Brake.
Removing the flywheel .
6. Unscrew the M20 ring anchoring the flywheel to the secondary
shaft.
7. Remove the flywheel.