TECHNOGYM BIKE LIVE Pre-Installation Requirements
Rev. 1.0
- 17 -
PIR-00161-EN - Uncontrolled copy if printed
5.4.1 Facility / Hotel (Business to Business (B2B))
The wireless network should be installed and configured only by specialised companies and expert
technicians.
▪
The equipment must not be more than 25-30 metres LOS (line of sight) away from the Access
Point (analyse possible problems due to the presence of walls or other obstacles between the
Access Point and the equipment).
▪
If you use an Access Point with a fixed channel: avoid overlapping problems if, in the same
area, there are
Access Points
that use the same channel.
5.4.2 Home (Business to Consumer (B2C))
▪
Make sure the wi-fi signal is reachable by the equipment.
▪
If you use an Access Point / Wi-Fi router with a fixed channel: avoid overlapping problems if,
in the same area, there are
Access Points / Wi-Fi routers
that use the same channel.
5.5 MAXIMUM NUMBER OF EQUIPMENT CONNECTED
TO ONE ACCESS POINT
▪
Up to 5 devices: use a commercial Access Point.
▪
More than 5 devices: use a professional Access Point (see the AP technical datasheet).
For more details about Access Point (AP), refer to the AP technical specifications.
5.6 INTERNET SPEED REQUIREMENTS FOR
STREAMING
The use and quality of the service depends on the speed of the internet connection. Make sure to
have, for each equipment, the following internet connection, for the best audio and video experien
-
ce:
5 Mbps or more: HD quality (up to 1080p)
In case of lower speed, the product adapts automatically to the speed connection available, reduc
-
ing the quality of the service and the video resolution. In detail:
3 Mbps: for viewing medium quality;
1.5 Mbps: for viewing low quality video (minimum) (not recommended).