5
User defined scenes can be recorded to the DMX Scene Controller using the
DMX snapshot mode.
Scene Recall
Scene recall is dependent on how you have linked your dual switches as
described in the graphic below and in the previous section: Linking Wireless
Dual Switches.
Snapshot DMX Scenes to the Controller
When switches have been linked to the controller and the scenes assigned, the
DMX Scene Controller provides the ability to record (snapshot) user defined
scenes and store them in the controller to be recalled by the linked stations.
Snapshot a Scene
To accomplish a DMX snapshot, you will need a DMX control source, like a
lighting console, that is temporarily connected to the DMX input of the DMX
Scene Controller. In addition, you will need access to the linked dual switches.
Step 1: Place the controller in DMX Snapshot Mode by following the sequence
below.
step 1.a
SCENARIO #1
SCENARIO #2
two
four
or
Scene 5
Scene 8
Scene 7
Scene 6
Scene 1
Scene 4
Scene 3
Scene 2
three
one
one three
two
four
1
3
2
4
2
4
1
3
step 1.a
step 1.b
step 1.c
