DEVELOPMENT, PRODUCTION, DELIVERY
Detection and locating, measuring equipment, water leak detectors, cable locators, cable and pipe locators
30
Appendix C
Transmitter AG-105 Indication
Battery holder
with the handle in the
center for removing.
Contains 8 alkaline cells
1,5V «type С».
Electrical power supply field
One of the three categories of
power source VOLTAGE «U» and
ABSORBED CURRENT «I» is always
displayed by the glow of one of the
three-coloured indicators.
Output parameters field
VOLTAGE «U, V», CURRENT «I, А» and load
POWER «P,W» and also its RESISTANCE «R,
Ω
/ k
Ω
».
The only possible
red
glow of indicators of
this field means «oscillation» is in progress.
Internal parameters field
POWER SUPPLY VOLTAGE
«
» and FREQUENCY of the
generated continuous «Co» or pulse
«Pu» signals «
f, kHz
».
Green
glow of POWER SUPPLY
VOLTAGE indicator
«
» can be seen in the “stop” mode,
red
– in «oscillation» mode.
Internal induction transmitting
antenna field «In»
In «antenna» mode «In» the orientation
mark «In axis» should be positioned
precisely above communication axis
and oriented parallel to its direction.
CHOICE button
By sequenced presses MODE or
PARAMETER indication can be chosen
to be shown on the “Digital display”.
START/STOP button
The sequenced presses are switching
the device from «STOP» mode to
«OSCILLATION» and back.
Digital display
shows NUMERICAL value of the
parameter («
» / «f,кHz» / «U,V»
/ «I,А» / «Р,W» / «R,
Ω
/ k
Ω
») and
SYMBOLIC notation of the mode
(«In» - internal transmitting inductor/
«An» - external induction transmitting
antenna/ «Co» - continuous oscillation
mode/ «Pu» - pulse modulation mode.
Type of the displaying value is defined
by the CHOICE button.
POWER
button
on /off
switching of
the electric
power
supply
LESS/
MORE
buttons
Decrement
/ increment
(adjustment)
of the
chosen
(mode) or
parameter
value.
Modes field
has indicators of «ANTENNA»« »
and «MODULATION» «
» modes.
If “earrings” or “clamp” are
connected to the output, the
indicator « » not glowing.
In «Antenna» mode, the indicator
« » is always glowing:
green
in
case of internal antenna or
yellow
in
case of external.
In case of «regular» (not modulated)
signal the indicator «
» is not
glowing.
In case of «MODULATION» (special
form signal) the indicator
«
» always glows:
green
in pulse
mode «Pu».
Therefore, current operating mode
is always displayed in the «modes
field».
INDICATION EXAMPLES
«nominal»
power supply
voltage
«low» absorbed
current
external
antenna «An» is
connected
pulse
modulation
mode «Pu»
«oscillation»
operation mode
output voltage
40V
«U»
green
«I»
green
« »
yellow
«
»
green
red
glowing
«
U,V
»
«
U,V
» → «40»
Summary of Contents for SUCCESS-438.15N
Page 1: ......
