Techno Line WT290, Instruction Manual

Page: 14 / 71

Page 5
ALARM SETTINGS
x
Press the ALARM 1 button to turn on/off alarm 1. The alarm 1 icon is displayed when alarm 1 is
active and is not displayed while alarm 1 is not active.
x
Hold the ALARM 1 button to enter into alarm 1 setting and the hour digits flash. Press the °C/°F
/ UP or the 12/24 / DOWN button to set the hour of alarm 1.
x
Press the ALARM 1 button to confirm and the minute digits flash. Press the °C/°F / UP or the
12/24 / DOWN button to set the minute of alarm 1.
x Press the ALARM 1 button to confirm and exit the alarm setting.
x
Use the ALARM 2 button instead of ALARM 1 button in the above setting to set alarm 2.
Notes:
x
Press and hold the the °C/°F / UP or the 12/24 / DOWN button to speed up setting process.
x
The setting will automatically return to time display mode, if no button is used for 30 seconds.
x
Press any button except the SNOOZE button during the active alarm sound to stop the alarm
and the alarm will sound again on the next day at the same time.
x
Alarm sound duration is 2 minutes and the alarm sound speed is increased during the duration
SNOOZE FUNCTION
When alarm sound is active, press SNOOZE/LIGHT to enter into snooze mode and the Zz icon and
the alarm icon will flash. The alarm will sound again after 5 minutes. Press any button except the
SNOOZE button during the active alarm sound to stop the alarm and the alarm will sound again on the
next day at the same time.