Techno Line WS6447, Instruction Manual

Page: 14 / 70

EN 5
3. Press the AL SET/ ON.OFF button again, displayed and the alarm hour digit flash. Press

or

to set the hours of your desired alarm time.
4. Press the AL SET/ ON.OFF button again, the alarm minute digits flash. Press

or

button to
set the minutes of your desired alarm time.
5. Press the AL SET/ ON.OFF button again to complete set-up. If no key is pressed in
approximate 10 seconds at any time during set-up, the clock will exit the alarm set-up mode.
TO TURN ON OR OFF YOUR DAILY ALARM
1. At normal time display mode, press the AL SET/ ON.OFF button to turn on Alarm 1 only,
appears on the LCD.
2. Press the AL SET/ ON.OFF button again to turn on Alarm 2 only, appears on the LCD.
3. Press the AL SET/ ON.OFF button again to turn on both Alarm 1 & 2, both and appear
on the LCD.
4. Press the AL SET/ ON.OFF button again to turn off both Alarm 1 & 2, both and
disappear on the LCD.
TO USE SNOOZE ALARM
When time reaches your set alarm time, your weather station will give a beep sound to wake you up.
The corresponding or will flash.
1. Press once to stop the alarm temporarily and the corresponding or keeps
flashing. The alarm will beep again according to your set snooze duration.
2. When the alarm is sounding, press AL SET/ ON.OFF once and the alarm will stop for the day,
or become static, alarm will come on again at the same time next day.
Alarm Duration: 2 minutes
TO USE THE HI-LO-OFF DIMMER
At normal time display mode, press to adjust the brightness (Hi/ Lo/ Off) of the LCD
display. This can only be done when the AC/DC adaptor is being used.
TO DISPLAY TEMPERATURE IN DEGREE °C OR °F
Press the

/ (°C/°F) button to display temperature in °C or °F.
TO USE PROGRAMMABLE AUTO DIM BACKLIGHT
1. At normal time display mode, press and hold button until the display shows
and “
OFF
” flashes. Press the 
or

button
to select “
ON
” to activate the auto dim backlight
function.
2. Press button
again, “
0:00
” flash, press 
or

button to set auto dim starting
time.
3. Press button
once again, “
8 Hr
” flash, press 
or

button to set Auto Dim
duration by 1 Hr steps from 1Hr to 12 Hr.
4. Press button once again (or if no key is pressed in around 10 seconds) to store
the auto dim setting and return to normal time display remains on the LCD display.