Care and maintenance
Read carefully the manual before using this product.
Do not expose the main unit to direct sunlight, extreme cold and moisture, and sudden
changes in temperature. This would reduce the accuracy of detection.
Do not place the product in locations prone to vibration and shocks
– these may cause
damage.
Do not expose the product to excessive force, impacts, dust, high temperatures or
humidity - these may cause malfunction, shorter battery life, damage to batteries and
deformation of plastic parts.
Do not expose the main unit to rain or moisture, if it is not intended for outdoor use.
Do not place any open flame sources on the product, e.g. a lit candle, etc.
Do not place the product to places with inadequate air flow.
Do not insert any objects in the product vents.
Do not tamper with the internal electric circuits of the product
– you may damage it, which
will automatically terminate the guarantee. The product should only be repaired by a
qualified professional.
To clean the product, use a slightly moistened soft cloth. Do not use solvents or cleaning
agents - they could scratch plastic parts and damage electric circuits.
Do not immerse the product in water or other liquids.
The main unit may not be exposed to dripping or splashing water.
In the event of damage or defect of the product, do not perform any repairs by yourself.
The transmitter of the wireless indoor/outdoor thermometer works down to -20°C, but at
low temperatures, especially for a long period of time, the batteries may freeze, which
may prevent the transmitter from transmitting the signal to the receiver and at the same
time the transmission range is reduced at very low temperatures.
This device is not intended for use by persons (including children) whose physical,
sensory or mental disability or lack of experience and expertise prevents safe use, unless
they are supervised or instructed regarding use of the appliance by a person responsible
for their safety. It is necessary to supervise children to ensure they do not play with the
device.
Note
Manufacturer reserves the right to change specifications of the product.
Manufacturer and supplier are not responsible for malfunction where interference occurs.
This product is not intended for medical or commercial purposes.