3.
Press
SET
once again, the hour digits flash. Press
or
to set the hours. Press and hold
or
will
accelerate setting in fast speed.
4.
Press
SET
once again, the minute digits flash. Press
or
to set the minutes. Press and hold
or
will
accelerate setting in fast speed.
5.
Press
SET
once again,
05
flash and
SN
appears. Press
or
to set snooze duration (from 5 min to 60 min.)
6.
Press
SET
again or if no key pressed for approx. 10 seconds to exit the setting mode.
TO SET ALARM
1.
Press and hold
ALM
ON-OFF
until the hour digit flash. Then press
or
to set alarm hours. Press and hold
or
to accelerate setting in fast speed.
PM
will appear on the display to indicate afternoon time. There is no
AM
indicator.
2.
Press
ALM
ON-OFF
once again, alarm minute digits flash. Then press
or
to set alarm minutes.
3.
Press
ALM ON-OFF
once again or if no key pressed for approx. 10 seconds to exit the Alarm setting mode.
4.
After setting the alarm it is activated automatically. The
symbol will appear, when the alarm is
activated.
TO TURN THE ALARM ON OR OFF
1. At normal time display, when the alarm is deactivated, press
ALM ON-OFF
once to activate the alarm and the
symbol
appears.
2. Press
ALM ON-OFF
once again to deactivate Alarm and
disappears.
TO STOP THE ALARM AND REPEAT ON THE NEXT DAY
When alarm is sounding, the alarm icon flashes. Press any button except
SNOOZE / DIMMER
or
PROJECTION
once to stop the
alarm and reset it to come on the following day. After that
remains on the display.
TO ACTIVATE THE SNOOZE FUNCTION (default snooze duration is 5 minutes)
When alarm is sounding, press
SNOOZE/ DIMMER
once, the alarm will be silenced and
keeps flashing, alarm come on
again after the set snooze duration.
Remarks:
if only use the batteries, press
SNOOZE/ DIMMER
once to activate the backlight for 5 seconds.
TO USE THE SLEEP FUNCTION
Please note the instructions and further explanations from the introduction - in the beginning of the manual - to use the
sleep function effectively!
1. Simply press
SLEEP
on the unit or on the remote once to active the sleep function.
2. The countdown time appears
“01” (1 minute is default time).
3.
Press the SLEEP or the remote button repeatedly to increase the countdown time up to “06” minutes (320 seconds), when “06”
is reached and the SLEEP button or remote button is pressed once again the countdown time retur
ns to “01”. If no button is
pressed for 3 seconds the countdown starts.
4. The countdown starts and is displayed / projected in seconds. After 4 seconds the display changes to segment display. The
timing the segments appear is random.
