LPC1224_BO_SRM
Board v0.3
user@host:
˜
/sw$
lpcprog -d /dev/ttyUSB0 -c flash mod_gpio.bin
Part ID 0x3640c02b found on line 18
Flash now all blank.
Checksum check OK
Flash size : 32768, trying to flash 8 blocks of 1024 bytes : 8192
Writing started, 8 blocks of 1024 bytes ...
user@host:
˜
/sw$
If you want to get information on the connected device use the
id
command of
lpcprog
:
user@host:
˜
/sw$
lpcprog -d /dev/ttyUSB0 -c id
Part ID 0x3640c02b found on line 18
Part ID is 0x3640c02b
UID: 0x1228f5f5 - 0x4b324307 - 0x08333834 - 0x4d7b2c1a
Boot code version is 1.6
user@host:
˜
/sw$
Note
: The part information definition for each supported micro-controller is in the lpctools package.
See lpctools readme and lpcprog or lpcisp help (-h option) or manpages for more information.
6 Board revisions history
6.1 v01
This board revision has not been sold.
First prototype version, with Rx and Tx crossed for UART1, making it impossible to connect them to USB to
UART bridge.
6.2 v02
This board revision has not been sold.
Added 3.0V LDO voltage regulator for Vref.
6.3 v03
Actual version sold as of writting of this documentation.
Added a 100nF cap to Vref pin.
Techno-Innov - DomoTab
http://www.techno-innov.fr
page 16 /
22
