Techno CNC Systems HD Mini User Manual Download Page 24

Page: 24 / 67

Call: 1-631-648-7481 or Visit: support.technocnc.com

HD Series Manual

NK105G2

4.3 Setting the Table Size.

From the main screen, press Menu to access the Menu screen.

Use the arrow keys to move the cursor and
highlight

Press OK to select.

The MFR parameters screen will now open.

Use the arrow keys to move the cursor and highlight.

Press OK to select.

Use the arrow keys to highlight a value, press OK to edit the value, and
press OK to save it.

Press Cancel when the value is highlighted to abort the edit.

Use the arrow keys to scroll down the screen until the negative values
are displayed.

When all the edits are complete, press Cancel to exit out of this screen.
Keep pressing cancel until you return to the main screen.

The asterisk * on this setting indicates that the machine must be powered down and the
axes homed in order for these new values to take affect.

If these values are incorrect it will effect the running of the machine.

If the values are too small, the machine will stall/stop when it reaches the value entered.

If the value is too big, it is possible for the machine to hit the end of travel and damage
could occur.

5. MFR param

4. Machine stroke

Password: 33587550

Summary of Contents for HD Mini




































































Search results

Summary of Contents for HD Mini

Reviews:

Related manuals for HD Mini

Brands by name

Popular brands

Techno CNC Systems HD Mini, User Manual

Search results

Summary of Contents for HD Mini

Reviews:

Related manuals for HD Mini

Brands by name

Popular brands