3-19
3.4.3
Operational Check
(1)
Turn Unit On (Refer to paragraph 3.5).
(2)
Recall Channels "00" through "25" (Refer to paragraph 3.3.6). Ensure that the
frequencies indicated for each channel displayed correspond to those selected.
(3)
Transmit on each channel. Observe that the TX Led (Refer to Figure 3-2, for
location) does not light on channels selected to operate exclusively in receive mode.
(4)
Enter a valid frequency (within the frequency range of (117.975 MHz to 138 MHz)
that differs from the frequency stored in channel "00".
(5)
Store the frequency in channel "00" (Refer to paragraph 3.3.5).
(6)
Recall Channel "00" frequency. Channel "00" frequency displayed shall be the same
frequency entered before Locking the operating configuration (ie. different from the
frequency entered in step 4).
(7)
Perform Steps 4 through 6 for each channel.
