0 0 2 6
FIGURE 2-1
Outline Drawing for Model TAC-200A Audio Controller
2 . 5
INSTALLATION - KIT CONTENTS
The installation kit P/No. 969732, consists of:
1.
One 50 pin Cannon D mating connector (female) complete with crimp pins and hood.
2 .
One 37 pin Cannon D mating connector (female) complete with crimp pins and hood.
3 .
One 15 pin Cannon D mating connector (male) complete with crimp pins and hood.
2 . 6
INSTALLATION - PIN LOCATIONS AND CONNECTIONS
The pin numbers and locations for the 50, 37 and 15 pin Cannon D connectors, located on
the rear of the TAC-200A Audio Controller, are depicted in
Figure 2-2.
Pin connections
descriptions are provided in
Tables 2-1 (50
pin “D”), 2-2 (37 pin “D”), and 2-3 (15 pin
“D “) .
2 . 7
HEADPHONE INSTALLATION
The TAC-200A is intended for use with industry standard 600 ohm headphones there is no
provision for connection to an 8 ohm or 4 ohm speaker. All Headphone connections for
Pilot, Co-pilot, and Passengers are listed in
Table
2-3 (15 pin “D”).
See also the connection diagram
Figure 2-5.
2 . 8
MICROPHONE INSTALLATION
All microphone connections to the TAC-200A must be done with shielded cables. The
inputs are intended for use with standard Carbon or equivalent Microphones. Microphone
connections are listed in
Table 2-1
(50 pin “D”).
See also the connection diagram
Figure 2-3.
2 - 2
