background image

 

Guarantee conditions 
 

Note: 

The following guarantee conditions do not in any way limit the legal right to a guarantee, rather 

expand your rights as a consumer. 
 

1.  The  company  Technische  Alternative  elektronische  Steuerungsgerätegesellschaft  m.  b.  H. 

provides a two-year guarantee from the date of purchase by the end consumer for all the de-
vices and parts which it sells. Defects must be reported immediately upon detection and within 
the guarantee period. Technical support knows the correct solution for nearly all problems. In 
this  respect,  contacting  us  immediately  will  help  to  avoid  unnecessary  expense  or  effort  in 
troubleshooting.  

 

2.  The guarantee includes the free of charge repair (but not the cost of on-site fault-finding, re-

moval, refitting and shipping) of operational and material defects which impair operation. In the 
event that a repair is not economically worthwhile according to the assessment of Technische 
Alternative, the goods will be replaced.  

 

3.  Not included is damage resulting from the effects of overvoltages or abnormal ambient condi-

tions. Likewise, no guarantee liability can be accepted if the device defect is due to: transport 
damage for  which  we  are  not  responsible,  incorrect  installation  and  assembly,  incorrect  use, 
non-observance of operating and installation instructions or incorrect maintenance.  
 

4.  The guarantee claim will expire if repairs or actions are carried out by persons who are not au-

thorised  to  do  so  or  have  not  been  so  authorised  by  us  or  if  our  devices  are  operated  with 
spare, supplementary or accessory parts which are not considered to be original parts. 

 

5.  The defective parts must be sent to our factory with an enclosed copy of the proof of purchase 

and a precise description of the defect. Processing is accelerated if an RMA number is applied 
for  via our home page 

www.ta.co.at

.

 

A prior clarification of the defect with our technical sup-

port is necessary. 

 

6.  Services provided under guarantee result neither in an extension of the guarantee period nor 

in  a  resetting  of  the  guarantee  period.  The  guarantee  period  for  fitted  parts  ends  with  the 
guarantee period of the whole device.  

 

7.  Extended or other claims, especially those for compensation for damage other than to the de-

vice itself are, insofar as a liability is not legally required, excluded. 

 

 
 
 
 
 
 
Legal notice 

These assembly and operating instructions are protected by copyright.  

Use outside the copyright requires the consent of the company Technische Alternative elektronische 
Steuerungsgerätegesellschaft  m.  b.  H..  This  applies  in  particular  to  reproductions,  translations  and 
electronic media.

 

 
 
 
 
 
 
 

elektronische Steuerungsgerätegesellschaft m. b. H.  

A-3872 Amaliendorf Langestraße 124 
Tel +43 (0)2862 53635                     Fax +43 (0)2862 53635 7 

 

E-Mail: 

[email protected]

                      --- www.ta.co.at  ---                                   © 2014 

 

Summary of Contents for FRISTAR





















Reviews: