C.M.I. menu settings
30
Data logging
The settings for data logging are made in this menu. Man can log either from the DL bus
(max. 2 data lines) or from the CAN bus (max. 8 data records).
The data is saved to the SD card.
Simultaneous logging from DL and CAN bus is not possible.
Example:
CAN data logging of 2 data records each of node 1 (e.g. UVR1611) and of node
40 (e.g. CAN-EZ)
1.
Display of already used memory in % of available memory space for data logging.
2.
The saving criterion defines the time interval for data logging.
Entries from 10 seconds
up to 60 minutes are possible.
3.
Source information (DL bus: DL1, DL2 or CAN bus: entry of node number) and of the
data record. Controller UVR1611 and the CAN energy meter CAN-EZ can output 2 data
records.
4.
Possibility to delete the internal memory
of the C.M.I.
.
5.
Possibility to delete the logged data
on the SD card
.
6.
A file is created on the SD card which can be read out directly on the PC with Winsol.
7.
Completion of entry with “
Save
”.
8.
Cancellation of entry and resetting to the setting saved last.
5
1
2
3
4
6
5
7
5
8
5
