4
If the Measured variable is set to
Automatic
, it is not possible to perform any further settings
under Unit. However, other values can be simulated by changing the measured variables: if,
for example, the measured variable "Temperature" is assigned to one of the potentiometers
(indices 6 and 7), this can be used to simulate a temperature for a controller for further cal
-
culations.
The table found under
Index
(page 2) provides information about which index outputs
which value with which measured variable.
On this model, Indices
9-12
are surplus to requirements, as the device does not have any
buttons (see AI5
T
-DL).
Dimensions in mm
Subject to technical modifications.
©2018
Technical Data
DL bus load
15%
IP rating
IP40
Terminal
max. 1,5 mm
2
Max. ambient temperature
45 °C
Input voltage range
0-10 V
