TechniSat TECHNIRADIO 40, Manual, Page: 104 / 220

104
11.4 Factory settings
If you change the location of the device, e.g. when moving house, it is possible that
the saved stations can no longer be received. In this case you can reset the device to
Factory Settings to delete all the saved stations and then launch a new scan.
> Select the entry
[Factory settings]
in the
[System]
sub-menu and press
Snooze/Select.
> Use the Next / Prev. buttons to select the [Yes] entry to reset to the factory
settings and press Snooze/Select .
All previously stored stations and settings will now be deleted. The device is
now in the same status as when delivered.
> The display will show [Restart ...] and the device will start with the language
selection [Language] .