TechniSat TECHNIMAX SR1, Quick Start Manual

Page: 34 / 176

34
7.1 Factory settings
If the TECHNIMAX SR1 does not function as intended or if another error occurs, it can be reset to the factory settings.
CAUTION: Resetting to factory settings clears all stored data.
> Press and hold the START/PAUSE button for at least 10 seconds.
10 seconds
> All indicator lights go out for 1-2 seconds.
> The TECHNIMAX SR1 is restarted and all the indicator lights come on again. Then switch the TECHNIMAX SR1
off and then back on again using the power switch.
8 Technical data
Room size and cleaning time up to 200 m² (running time up to 120 minutes at the lowest level)
Room coverage (standard test room
according to IEC 60312-3 version 2010)
>95%
Cleaning system 1 main brush, 2 side brushes
Dust bin 0.6 litres
Filter system Hepa filter for allergy class 13 with up to 99.95% filter performance
Navigation Laser navigation for map formation and avoiding obstacles,
Wrap-around bumper and crash sensors
Indicators LED status indicator
Communication WiFi and Bluetooth