manualshive.com logo in svg

TechniSat TechniBox VIACAM, Instruction Manual

Share
Download
TechniSat TechniBox VIACAM Instruction Manual Download Page 38

This menu differs from the 

Transponder 

menu only in terms of the list item 

Service ID

.

>

Proceed as described in Point 7.7.3 above.

>

Use the 

up/down arrow

keys to mark the entry 

Service ID

.

>

Use the 

numeric key

pad to enter the 

Service ID

number.

>

Confirm with the 

OK 

key.

7.8 Conditional Access

This entry provides you with access to the sub-menus of the VIACCESS card, when inser-
ted, or of the CA modules in slots A or B, when inserted. Use the 

arrow keys

to mark the

desired function, i.e. the VIACCESS card or one of the slots, and confirm with 

OK.

You can

then obtain information relating to the smart card inserted.

7.9 System Configuration

This menu entry allows you to view all data relating to the specific receiver.
>

Use the 

up/down arrow

keys to mark this entry in the sub-menu 

Settings

.

>

Confirm with the 

OK 

key.

>

Use the 

Back

or 

Menu

keys to exit this function.

7.10 Activate factory settings/Delete programme memory

You may at any stage revert to the original factory settings for the LNB. You may also wish to
delete the programme list, which may be outdated, completely before initiating a new search.
Please note that, if you delete all programmes from memory, you will then have to initiate a
search, and you will have to copy your selected programmes from the Total List into the User
List.
>

Use the 

Menu

key to display the 

Main Menu

.

>

Use the 

up/down arrow

keys to mark the entry 

Settings

, which will be shown in

red.

>

Confirm with the 

OK 

key.

The sub-menu 

>Settings

will be displayed.

38

bed_anl_ViaCam_engl_2.qxd  30.03.01  14:21  Seite 38

Get user manuals: 

See SafeManuals.com

 

 

Summary of Contents for TechniBox VIACAM















































Reviews:

No comments

Brands by name

Popular brands

Load more brands