>
Now use the
left/right arrow keys
to mark the channel with the weakest received
signal.
>
Reposition the aerial so that the two cursor bars display maximum amplitude.
red cursor bar
poor reception
yellow cursor bar
good reception
green cursor bar
very good reception
7 Operation
7.1 Turning on and off
>
Press the
On/Standby
button on the unit or on the remote control to switch the
digital receiver on.
>
Press the same button on the unit or remote control once again to switch the unit off
again.
>
The unit will now be in Standby mode and this is indicated by the red LED on the
display.
7.2 Programme selection
7.2.1 Using the up/down programme keys
>
Use the
up/down programme keys
on the receiver or the remote control to
switch a programme positionon or off.
7.2.2 Using the numeric keyboard
>
Use the
numeric keyboard
to enter the number of the programme that you want
For example:
1
for programme position 1
1
, then
4
for programme position 14
2
, then
3
, then
4
for programmer position 234
22
00100963_Digiboxx_T4_VA_EN.qxd 24.6.2009 9:38 Str. 22
