8
INTRO PLAY
1.
Press the
MEM./P-MODE
button once in play, "INTRO" shows on the display. Each track
is played for 10seconds respectively.
2.
To cancel repeat play, press
MEM./P-MODE
button until "INTRO" disappears from
display.
PROGRAM TRACKS
Programming tracks of disc are possible when playback is stopped. Up to CD 20 tracks /MP3 99
tracks can be stored in the memory in any order.
1. In stop mode, press the
MEM./P-MODE
button, the
MEMORY
and
P01
will show on the
display.
2. Press the CD SKIP/SEARCH FORWARD button to select the first desired track to be
programmed.
3. Press the
MEM./P-MOD
E button to enter. The display changes to show
P02
.
4. Repeat steps 2 & 3 to store other desired tracks until all tracks are programmed.
5. Press the
PLAY/PAUSE/SELECT/SCAN
button to start playback from the first programmed
track.
6. Press the
STOP/MENU
button to stop program playback.
To Erase the Memory (Program)
To clear the program, you have two options:
1. Press
STOP/MENU
button in stop mode, or
2.
Open the CD compartment lid, program will be erased.
USB OPERATION
1. Press
STANDBY/FUNC.
button
,
USB mode shown on the display.
2. Connect the USB to the USB INPUT. The unit will display total number of tracks stored inside
the USB, the playback stars from track 1 automatically after reading the USB.
3. Press the
PLAY/PAUSE/SELECT/SCAN
button to temporarily stop. The track number will
flash.
1. Press the
STOP/MENU
button to stop playing. The display will show total number of tracks.
2. Proceed repeat play (repeat 1/repeat all/repeat folder)/program play/random play/skip up
and down operation as the same described in above “CD OPERATION”.
CAUTION:
!
Do not use any USB extension cable for connecting the USB stick which may cause harmful
interference
!
In case of malfunction due to electrostatic discharge, just reset the product (reconnect of
power source may be required) to resume normal operation.
AUX-IN OPERATION
This unit has provided special AUX-IN jack, through this jack other audio sources can be
connected to this unit and be amplified.
1.
Press
STANDBY/FUNC.
button
,
AUX mode shown on the display
.
2. Connect the audio cable into the AUX-IN jack and the other end connect to the AUDIO OUT
jack of the external audio source. The unit will change to AUX mode automatically.
3. Adjust the volume of the main unit to your desired level.
4. Press PLAY of the external audio source (eg. MP3 player) to start playback.
Summary of Contents for DIGITRADIO 1980
Page 1: ......