>
Use the
numeric key pad
to enter the correct symbol rate.
>
Once you have entered all the information, start the search by using the
up/down
arrow keys
to mark the entry
Start search
.
>
Confirm with the
OK
key.
Please note any notes and information displayed on the screen.
7.7.4 Channel/Programme
If a channel cannot be found by means of any of the first three search modes (described
under 7.7.1 to 7.7.3), it may be necessary to enter a programme-specific Service-ID-Number.
This number will be obtainable directly from the service provider/broadcaster, or from the
Internet.
>
Select the menu
>Search>Programme
.
>
Use the
up/down arrow keys
to mark the entry Programme.
>
Confirm with the
OK
key.
The menu
>Search>Programme
will be displayed
This menu differs from the Transponder menu only in terms of the list item Service ID.
>
Proceed as described in Point 7.7.3 above.
>
Use the
up/down arrow keys
to mark the entry
Service ID
.
>
Use the
numeric key pad
to enter the Service ID number.
7.8 Activate factory settings/change data channels
You may at any stage revert to the original default settings for the LNB, as set in the factory.
You may also wish to delete the programme list, which may be outdated, completely before
initiating a new search. Please note that, if you delete all programmes from memory, you will
then have to initiate a search, and you will have to copy your selected programmes from the
Total List into the User List.
>
Use the
Menu
key to display the
Main Menu
.
37
bed_anl_DigiCom1A-1plus-englisch.qxd 21.09.00 16:25 Seite 37
