![background image](http://html1.mh-extra.com/html/technisat/astrastar-ax-1/astrastar-ax-1_operating-instructions-manual_1069669007.webp)
In this case you cannot receive TV channels and digital radio
channels at the same time.
As soon as the ADR receiver is disconnected from the network or
the ADR receiver is in standby mode the LNB voltage is switched
through to the LNB by the satellite television receiver.
Moreover, you can connect the
audio outputs
of your satellite
television receiver to the
audio analogue inputs
of your ADR
receiver. The audio signals of the satellite television receiver are
transmitted to the amplifier when the ADR receiver is disconnected
from the network or is in standby mode.
3.4 Personal computer
You can connect a personal computer to the female connector
PC IN/OUT
that can be used to control the ADR receiver. The
software and connection cables you can buy from your TechniSat
sales representative.
4 Installation
4.1 Calling the installation menu
The installation menu includes the most important basic settings for
the set-up of the ADR receiver. It can only be called with the help
of a multiple key operation so that none of the settings are
modified by mistake.
>
switch off the ASTRASTAR AX 1 with
>
press
or
on the ADR receiver and
>
at the same time switch on the receiver again with
The individual settings are marked in the channel number display
with the stages
E1
to
E7
. The function which is to be modified is
indicated via the information display.
E1
setting the remote control code
E2
selecting the display language
E3
adapting the local oscillator frequency
E4
selecting the search mode for Astra or other satellites
E5
selecting the search range
E6
deleting the channel memory
E7
copying the preprogrammation
The individual settings
E1, E4
and
E5
only serve for service purposes
or are provided for future applications.
A modification becomes effective when switching to the next
stage.
7
ADR
ST 3004 S
HiFi
Outdoor unit
:
V/H-LNB