TechniSat 0000/3961, Instruction Manual

Page: 124 / 316

124
10.5 Scan settings
In this menu item it is possible to set the sensitivity of the scan.
>
Open the Main menu by pressing the MENU button and use the SELECT knob
to select [Scan settings] .
> Press the SELECT knob .
> Select whether the scan should only stop for stations with a strong signal
[YES] or for all stations (including stations with a weak signal) [NO] .
With the NO setting, the scan stops automatically upon detecting each
available station. This can result in weak stations being played with
background noise.
> Then press the SELECT knob to save the setting.
10.6 Audio settings
> Open the
Main menu
by pressing the
MENU
button and use the
SELECT knob
to select [Audio settings] .
> Press the SELECT knob .