How To Use The PARI Filter Set
Intended Use:
The PARI Filter Set is to be used when inhaling nebulised
antibiotics. It prevents contamination of the environment by
the patient’s exhaled air. The PARI Filter Set should be used for
inhalation therapy of any medication which may be hazardous
to health if inhaled constantly. Due consideration for the use
of the PARI Filter Set should be given by nursing staff in the
hospital or a parent assisting their child when nebulising
antibiotics. It also helps prevent antibiotic resistance.
Please note; this information sheet does not replace the instructions for use.
Please ensure you read the Instructions for Use for both the eFlow® rapid and PARI
Filter/Valve Set.
How to Assemble to LC PLUS/LC SPRINT
1)
Place a filter pad (2) in the exhalation filter upper part (1b).
2)
Insert the exhalation filter lower part (1a) in the exhalation filter upper part with the
snap locks in the holes provided.
3)
Close the exhalation filter by turning its lower part clockwise as far as it will go.
4)
Insert the Y‐connection (3) in the exhalation filter and on the nebuliser (5a).
5)
Insert the mouthpiece without the expiratory valve (4) or BABY mask (6) onto the free
end of the Y‐connection.
6)
Connect the inspiratory valve (7) to the LC Plus.
a)
This part is not necessary if you are using an LC Sprint.
