Technimount System Cardiatek User Manual Download Page 2

Page: 2 / 46

Return To Table of Contents

CARDIATEK UG 202001-R01

www.technimount.com

publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language

in any form or by any means without the written permission of Technimount System or its affiliate companies.

Trademark Attributions

CARDIATEK® is a registered trademark of Technimount System, # 100128-013

The Cardiatek® Bracket, Wall Mount and Floor Mount is patented, under reference # 62/909

Impella® is a registered trademark from Abiomed.

Technimount System does not have a commercial relationship with Abiomed. Abiomed does not promote or sell

Technimount Products.

In order to ensure continuous improvements to our products and services, we invite you to communicate your

comments to our Customer Service Department at

[email protected].

See Contact Information.

Summary of Contents for Cardiatek















































Search results

Summary of Contents for Cardiatek

Reviews:

Related manuals for Cardiatek

Brands by name

Popular brands

Technimount System Cardiatek, User Manual

Search results

Summary of Contents for Cardiatek

Reviews:

Related manuals for Cardiatek

Brands by name

Popular brands