Technimount System Cardiatek User Manual Download Page 22

Page: 22 / 46

Return To Table of Contents

CARDIATEK UG 202001-R01

www.technimount.com

Installation Guide

REMOVING THE PACKAGING FOR INSTALLATION

Unpack boxes and check all items for proper operation as the Cardiatek Mounting Systems are delivered fully

assembled.

2. Ensure that all shipping and packaging materials have been properly removed from the product(s) prior to

installation.

Identify all of the product components and hardware prior to starting the installation.

The Cardiatek Mounting Systems must work properly before they are put into service.

Refer to the identification of components at the beginning of this user guide if needed.

NO TOOLS REQUIRED FOR INSTALLATION

There are no tools required for installation as the Cardiatek Mounting Systems are already fully assembled when

received. However, it is possible that some screws might have loosened during delivery. A basic Allen Key set could be

required if there are any screws that have become loose. Ensure to put a few drops of red locktite on the screws prior

to rescrewing tightly into place. If you have any questions regarding the installation, or need assistance, please contact

our Technical Support team at

[email protected]

Summary of Contents for Cardiatek















































Search results

Summary of Contents for Cardiatek

Reviews:

Related manuals for Cardiatek

Brands by name

Popular brands

Technimount System Cardiatek, User Manual

Search results

Summary of Contents for Cardiatek

Reviews:

Related manuals for Cardiatek

Brands by name

Popular brands